Parts
| Part | Total Qty. | Description | Substitutions | | R1 | 1 | 100K 1/4W Resistor |
| | R2 | 1 | 820K 1/4W Resistor |
| | R3, R14, R16, R18 | 4 | 2.2 Meg 1/4W Resistor |
| | R4, R5, R6 | 3 | 22K Pot |
| | R7, R8, R9, R25, R27, R29 | 6 | 10K 1/4W Resistor |
| | R10, R11, R12 | 3 | 680 Ohm 1/4W Resistor |
| | R13. R15, R17 | 3 | 580K 1/4W Resistor |
| | R19, R20, R21 | 3 | 39K 1/4W Resistor |
| | R22, R23, R24 | 3 | 47K 1/4W Resistor |
| | R26, R28, R30 | 3 | 33 Ohm 1/4W Resistor |
| | C1, C5, C6 | 3 | 0.012uF Polystyrene Capacitor |
| | C2, C9, C10, C11 | 4 | 3.3uF Electrolytic Capacitor |
| | C3, C4 | 2 | 0.0022uF Polystyrene Capacitor |
| | C7, C8 | 2 | 47nF Polystyrene Capacitor |
| | C12, C13, C14 | 3 | 0.47uF Electrolytic Capacitor |
| | C15, C16, C17 | 3 | 22uF Electrolytic Capacitor |
| | D1, D2, D3 | 3 | 1N4002 Silicon Diode |
| | D4, D5, D6, D8, D8 | 5 | Green LED |
| | D10, D11, D12, D13, D14 | 5 | Amber LED |
| | D16, D17, D18, D19, D20 | 5 | Red LED |
| | U1 | 1 | LM3900 Quad Op Amp |
| | U2, U3, U4 | 3 | AN6884 Bar Graph IC |
| | MISC | 1 | Board, Wires, Sockets For ICs |
|
| |
- The circuit expects line level inputs. If you connect it to speaker level, you will have to readjust the circuit every time you change the volume.
- After the circuit is connected, apply power and signal. Now adjust the pots until the corresponding group of LEDs reacts.
