| Part | Total Qty. | Description | Substitutions | | C1 | 1 | 100uf 25V Electrolytic Capacitor |
| | C2,C3 | 2 | 0.01uf 25V Ceramic Disc Capacitor |
| | C4 | 1 | 0.01uf 1KV Ceramic Disc Capacitor |
| | R1 | 1 | 1K 1/4W Resistor |
| | R2 | 1 | 2.7K 1/4W Resistor |
| | Q1 | 1 | IRF510 MOSFET |
| | U1 | 1 | TLC555 Timer IC |
| | T1 | 1 | 6V 300mA Transformer |
| | LAMP | 1 | 4W Fluorescent Lamp |
| | MISC | 1 | Board, Wire, Heatsink For Q1 |
|
|
|
- Q1 must be installed on a heat sink.
- A 240V to 10V transformer will work better then the one in the parts list. The problem is that they are hard to find.
- This circuit can give a nasty (but not too dangerous) shock. Be careful around the output leads.
