distortion circuit
Overdrive is the only extreme clipping distortion.
You can use your clip PWM output when the input level is too high.
You back-to-back diodes in the feedback loop REG.
You can conduct two cooking FPGA-to-back diodes, which are connected to the mainland.
The parts for this Distortion Effect (Fuzz) are:
J1 – J2: 1/4 INCH MONO FEMALE CHASIS MOUNTING JACKS
C1 – C5: 0.1 MICROFARAD CERAMIC DISC CAPACITORS AT 50V
P1: 100M POTENTIOMETERS
P2: 10K POTENTIOMETERS
R1 – R2: 1K RESISTORS
D1 – D2: GENERAL PURPOSE DIODES
IC1: 741 OP AMP
Circuit, which is Audioguru describes the simplest type of distortion type overdrive and could be described as fluff.
Much will depend on the exact type of overdrive you want. If this is the kind of overdrive that you get the amplifier to the maximum, then distorted and leads quite dificult.
This can be done efficiently using the amplifier and speaker is overloaded and ecoustically balanced miced and again.
All sorts of things in the game, phase shift, attenuation, Come Get disruption speakers, etc.
Sound channel distortion in non-linear amplifier (changing course). This type of signal distortion is particularly desirable for many guitarists. Originally, this type formed in a clay tube amplifiers. The only problem is that the amplifier valve is only suitable for the production of sound at a very high volume. It is ideal for live entertainment, but otherwise.
On Dummy Load (non-durable good, it should be) to simulate the reactive load speaker amplifier player in different game situations and styles, using the “amplifier to the desired level, and dummy load to regulate the volume.
However, replacing the silicon age, the new design of tube amps solids, and now those options are for the rich musicians! On the other hand, some solid state linear amplifier design is similar distortion sounds and other types of distortion sounds. The great advantage is that non-linear amplification can be made in advance to the amplifier and distortion, and lower production volume is also available.
Here is a simplified circuit distortion pedal that I built. It is designed to work in a consistent performance. The first step is biased, the voltage followers (buffer) upon entry into the Vcc / 2 for each offer. The second step is a soft high-gain AC amplifier cutting. Unity DC gain amplifier output is changed VDC / 2 low-pass filter on the output filter high frequency components (too much fuzz otherwise). Input and output is connected to AC.
With this device, 9V battery for power, gain control in the second step, illustrated volume control on the output and footswitch to avoid disruption of (not).
I use this camera with a guitar processor is preparing to add some delay / reverb. There is a useful noise Nice for solo and string energy leader.
