Essential components and accessories to start
The work on electronic projects is a good way to learn electronics and will be implemented depending on the project, a series of tools and electronic components can be requested. There are some basic elements and services that are needed in almost all electronic equipment and are a must.
The first electronic components that must be taken into account are resistances. You should have a good selection of resistancedifferent values in the range of a Mega-ohm to 10 ohms with a tolerance of 5%. Carbon film resistors are a good choice for small electronic projects. They are cheap and easily available both online and offline retailers.
Another important element that is necessary is for capacitors. Ceramic disc capacitors or electrolytic capacitors are both a good choice for beginners electronic design, and also a good choice would be needed in terms of values. (Lower voltage capacitors to50V) would probably suffice for most entry-level projects.
Signal diodes are also a good buy for electronic design and electronic components are used in a variety of projects. A package of 50, the silicon diodes 1N914 are a good choice, because switching and analog signals can be used.
The next component is electronic rectifier diodes, which are kept in power must be verified. Approximately 20 of these diodes at different values of a good number would startwith.
Transistor electronic components are considered later. PNP and NPN, which are the most common and widely available transistors would be needed. Recommend TO92 package for beginners.
The LEDs are a mixture of colors and rectangular and packages around a good addition. Most standard LEDs are now available through 3V to their power.
A switch is a component well in hand. Often used to the circuit switch on or off. If you useSelect Start, select a switch or button.
Depending on the circuits and integrated circuits, some projects would also be necessary. One of the most commonly used ICS is the 555-timer. Like all the above components, which are listed in a through hole and surface mount packages. Begins with the through the hole until you feel comfortable soldering small components.
Last but not least, some wire and coupling circuits are a must forElectronic projects. Depending on your project, how about a box design or accommodation? They protect the circuit from the elements and dust and can be fixed with screws.
Ready to get started with electronics? Now you have the basic elements together, find a good book on basic circuits. If you really have no experience with electronics, is not afraid of a book that is for children to achieve. The simple explanations and illustrations in these books you're ready to go tothe next phase of testing in a hurry!
